ERW273 proizvodnju cijevi linija - Kina Shijiazhuang Teneng

ERW273 proizvodnju cijevi linija

Kratki opis:

I. Summary The mill is intended for manufacturing pipe of Φ102mm-Φ273mm with thickness of 1.6mm–7.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths. Finished product will be of square and rectangle pipe. II. The t...


  • FOB Cijena: US $ 80000-100000 / komad
  • Min.order Količina: 1 set
  • Supply Sposobnost: 5-7 setova
  • Luka: Tianjin luka
  • Uvjeti plaćanja: L / C, D / A, D / P, T / T
  • Detalji o proizvodu

    oznake proizvoda

    I. Sažetak

    The mill is intended for manufacturing pipe of Φ102mm-Φ273mm with thickness of 1.6mm–7.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.

    Finished product will be of square and rectangle pipe.

    II. The technical flow of the production line

    {SteelTape}→→ Un-coiler →→Flattening→→Strip-head Cutter and welder→→Spiral Accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ Removing External burr →→Cooling unit →→ Sizing unit and straightener →→Cutting saw under computer-control →→ Packing machine & Run-out table

    III. Basic conditions:

    a) čeličnih cijevi Specifikacija

    1. Round pipe:                   Φ102mm-Φ273mm

    2. Square pipe:                  80×80-200X200mm

    3. Rectangle pipe:               60×100-250X150mm

    4. Pipe Thickness:               1.7– 7.0mm

    5. Pipe Length:                  4.0m – 12.0m

    6. Length Tolerance:             ±3mm

    b) SteelTape Specification

    1. Material:    Low Carbon steel (δb≤500Mpa, δs≤235Mpa)

    2. SteelTape: Inner diameter:      Φ480-Φ700mm

    Outer diameter:      Φmax=1800mm

    Strip steel width:      320mm-860mm

    Strip steel thickness:  1.7mm-7.0mm

    The maximum weight: 15 tons

    c) Line speed:  10-40m/min

    d) Produce direction: From left to right

    QQ图片20191213140331 QQ图片20191213140344


  • Prethodna
  • Sljedeće:

  • 
    WhatsApp Online Chat !